Veeder-Root TLS-350R PLUS - MAG-XL Flex Probe Dimensions; Figure 2. MAG-XL Flex Probe Parameters

Example Drawings MAG-XL Flex Probe Dimensions
10
MAG-XL Flex Probe Dimensions
Figure 2. MAG-XL Flex Probe parameters
LEGEND FOR NUMBERED BOXES IN Figure 2
1. Insertion measuring point for 2-inch pipe cap installations (top
of pipe cab to tank bottom). (see table below)
2. Insertion measuring point for 4-inch riser pipe installations
(top of riser pipe to tank bottom). Add 2 inches (50.8 mm) for
brass ring/and riser cap. (see table below)
3. Null zone - typical all probes (see table below)
4. Measured insertion Length (see table below for probe form
number to order - always order smaller probe if measured
insertion length falls between two probes in table.
5. Clearance off bottom (see table below)
6. Weight length (see table below)
7. Dead zone (see table below)
8. Tank grounding bracket
9. Grounding cable
10. Concrete tank pad
11. Earth grounded electrode with cable bracket
972-9.eps
5
7
6
3
4
2
1
10
11
9
8