14
Special Mag Probe Installation Kits
In addition to the Mag Probe installation kits shipped with each probe (containing floats, spacer rings, cable, etc.),
your installation may also require one or more of the special kits described in this section.
AST Installation Kit
This kit is recommended when installing Mag Probes into an above ground storage tank (AST). This kit contains a
length of flexible conduit, connectors, etc., for easier probe access. The kit contents are listed in Table 1 and
shown in Figure 8.
Figure 8. Mag Probe AST Installation Kit
Table 1. Mag Probe AST installation kit - Part No. 312020-984
Quantity Description Part Number
5 ft. 3/8” Flexible conduit 576008-294
1 3/8” Adaptor nut 329972-002
2 3/8” Straight liquidtite connectors and related parts 576008-295
1 Cord Grip Group 331028-001
Legend for numbered boxes
1 Cord grip
2 Flexible conduit 5 ft (1.5 m)
3 Liquidtight connector assembly (at riser cap)
4 Liquidtight connector assembly (at J-box)
To Next Page
Loading...
Need help?
General
