Signal strength of the AP
Access Points in the 5.0GHz spectrum can only be displayed if the VeEX USB Wifi adapter supports 802.11a/n or 802.11 a/n/ac.
Refer to the USB Wifi adapter specifications.
3. Use the 2.4GHz GraphCH and 5.0GraphCH tabs to view the number of Access Points detected for each channel in the 2.4GHz
and 5GHz bands and the strength of the strongest AP's signal for each channel.
2.4GHZ Channel
5GHZ Channel
4. Tap the Graph tab of the respective Channel to view the results in a graphical presentation.
TX300s_Platform_Manual_RevB00
To Next Page
Loading...
