Vega VEGAPULS 21 - Connecting to VEGAMET controller; Parameter adjustment with PACTware

29
9 Setup with PC/notebook (VEGACONNECT)
VEGAPULS 21 • Two-wire 4 … 20 mA/HART
58351-EN-191014
1
3
2
4
OPEN
TWIST
USB
LOCK
Fig. 24: Connection of the PC to the VEGAMET controller
1 Sensor
2 Connection cable with 2 mm pins
3 Controller,e.g.VEGAMET841
4 Interface adapter VEGACONNECT
9.2 Parameter adjustment with PACTware
For parameter adjustment of the sensor via a Windows PC, the con-
gurationsoftwarePACTwareandasuitableinstrumentdriver(DTM)
according to FDT standard are required. The up-to-date PACTware
version as well as all available DTMs are compiled in a DTM Collec-
tion. The DTMs can also be integrated into other frame applications
according to FDT standard.
Note:
To ensure that all instrument functions are supported, you should
always use the latest DTM Collection. Furthermore, not all described
functionsareincludedinolderrmwareversions.Youcandownload
the latest instrument software from our homepage. A description of
the update procedure is also available in the Internet.
Further setup steps are described in the operating instructions manu-
al "DTM Collection/PACTware" attached to each DTM Collection and
which can also be downloaded from the Internet. Detailed descrip-
tions are available in the online help of PACTware and the DTMs.
Via interface adapter to
the VEGAMET contr
oller
Prerequisites