EN
12
2. Unbox & Assembly
2.10 Saddle
Saddle Height
Step 1 : Loosen bolt saddle/frame
Unscrew the bolt in the frame next to the sad-
dle tube. Use Allen key 5’.
Step 2 : Set Saddle Height
We advise you to set your saddle to ‘hip height’. Stand beside the bike to mea-
sure this. Your knees should be slightly bent and when siing on the saddle,
one foot should be able to touch the ground with your toes.
Never extend the seatpost above the markings on the boom of the seatpost, as this might result in damage. If you feel the
seatpost is not high enough for you, please contact your local supplier for a longer seatpost.
To Next Page
Loading...
