15
EN
3. Before Your First Ride
3.01 Charge Baery
Our baeries come partially charged. Over time it could have slowly drained. Charge your baery for at least six hours for the rst time.
See Chapter 4.06 Baery & Charger, for all safety tips and usage guidelines.
Step 1 : Plug in charger
Use the baery key(s) from the toolbox to take out
your baery (see steps in chapter 4.06), or keep
the baery in the frame. Find the rubber protection
cap and peel it open. Connect the charger to the
baery.
To prevent electricity sparks, connect the
charger to the baery rst before you plug
the charger into the power socket.
Step 2 : Charge baery
Set your timer for six hours. The charger will show
a red light when charging the baery. When it turns
green, it’s fully charged. This will happen before the
six hours pass. Keep it charged while charging for
the rst time, so your baery life span is more ex-
tended. Next time charging, you can unplug when
the green light appears.
The chargers can get hot. This is consid-
ered normal behaviour.