P-5
Part #1169256 08/2010
Set Price:
This Mode allows you the option to price each selection to the same vend price, or price each
selection button independently.
1. When display reads “Set Price” press Button 4.
2. Press Button 2 or 3 to choose selections or “All.”
3. Press Button 4 to start the current vend price fl ashing.
4. Press Button 2 or 3 to increase or decrease price.
5. Press Button 4 to save your new programmed price.
6. Press Button 1 to exit mode.
Set Depth:
This Mode allows you to set the depth of each column. In this mode, you have the option of
setting the columns for single, double, triple or quadruple depths.
1. When display reads “Set Depth” press Button 4.
2. Press Button 2 or 3 to choose columns or “All.”
3. Press Button 4 to enter into the column and start the depth fl ashing.
4. Press Button 2 or 3 to scroll through the depth settings (1-4).
5. Press Button 4 to save your new depth setting.
6. Press Button 1 to exit mode.
Confi guration:
There are various options that you can turn ON/OFF. The options are:
Multi-Price
ON - All selections can be programmed individually.
OFF - All selections will be set to the same price as Selection 1.
Timing Features
ON - Gives you access to set the “Set Clock”, “Lighting”, “Refrigeration”,“Sales
OFF - Timing Features and modes are hidden.
Door Summary
ON - Sales and cash data are displayed as soon as the outer door is opened or by
activating the door switch.
OFF - Sales and cash data are not displayed when the door is opened.
Block 1”, “Sales Block 2”, “Discount”, “Override”, “ and ”Return” settings.
1. To adjust any of the settings, press Button 4 at “Confi guration” mode.
2. Press Button 2 or 3 to scroll through modes.
3. Press Button 4 to change the mode. The current setting will begin to fl ash.
4. Press Button 2 or 3 to change current setting.
5. Press Button 4 to save change.
6. Press Button 1 to exit sub-mode.
To Next Page
Loading...
