P-7
Part #1169256 08/2010
Space to Sales:
Allows you to program which column will vend when you choose a desired selection button.
There are 10 preset confi gurations (See inner door label for preset options). You also have the
option of doing a custom space to sales. To change current setting:
1. Press Button 4 when “Space to Sales” is displayed.
2. Press Button 4 to change current setting.
3. Press Button 2 or 3 to scroll through available settings.
4. Press Button 4 to save setting.
5. Press Button 1 to exit mode.
To customize your space to sales:
1. Press Button 4 when “ Space to Sales” is displayed, press 4 again to change current setting.
2. Press Button 2 or 3 to scroll until display reads “Space to Sales - Custom.”
3. Press Button 4. Display reads “Clear Settings?”
4. Press Button 4 to clear. Display reads “Custom Sel X - None.”
5. Press Button 4 to change a selection assignment.
6. Press Button 4 to assign (fl ashing) or unassign (not fl ashing or steady) columns.
7. Press Button 1. Display reads “Save?”
8. Press Button 4 to save.
9. Press Button 1 twice to exit the mode.
Set Program Password:
Allows the operator to password protect all the functions except Diagnostics, Coin Payout, Tube
Fill, and Test Mode.
1. Press Button 4 at “Closed Door Password” mode.
2. The current password will be displayed.
3. Press Button 2 or 3 while each digit is fl ashing to change current password.
4. Press Button 4 to save and advance to next digit.
5. Press Button 4 after the 4th digit to exit mode.
Depth Learning
ON - The control board will “learn” the depth setting after one row of product in the
column is vended.
OFF - The control board will not “learn” the depth setting.
Display Scroll
ON - The display will scroll from Left to Right.
OFF - The display will not scroll.
Temperature
ON - The cabinet temperature will display.
OFF - The cabinet temperature will not display.
Allows the operator to set a password to access Sales Data when the door is closed. Please note
that this function will not work if the password is set at 0000.
To Next Page
Loading...
