P-8
Part #1169256 08/2010
Set Language:
This Mode allows you to program different languages on the controller. The current languages
available are English, Spanish, and French.
1. Press Button 4 at “Set Language” mode. The current language will be displayed.
2. To change current language, press Button 4 to start language fl ashing.
3. Press Button 2 or 3 to choose a language.
4. Press Button 4 to save the language change.
5. Press Button 1 to exit mode.
Set Clock:
If the “Timing Features” in the “Confi guration” mode are turned ON, you will have access to this
mode. This mode allows you to set the current month, day, year, hour and minute.
To set the clock:
1. Press Button 4 at the “Set Clock” prompt. You will be able to scroll through the following
options by pressing Button 2 or 3.
- Enable ON/OFF - This will turn the clock timer on or off.
- MM/DD/YYYY HH:MM - This is the current time and date.
- Daylight Savings
2. Press Button 4 to change current setting. The current setting will begin to fl ash.
3. Press Button 2 or 3 to change current setting.
4. Press Button 4 to save current setting.
Lighting:
If the “Timing Features” in the “Confi guration” mode are turned ON, you will have access to this
mode. This mode allows you to turn the lights on/off with the internal timer.
Press Button 4 at the “Lighting” prompt. Scroll through the following options by pressing
buttons 2 or 3.
-Enable On/Off
-”Start Time 1” or “Start Time 2”
-”Stop Time 1” or “Stop Time 2”
5. Press button 1 to exit mode.
1. Press Button 4 at “Start Time 1” or “Start Time 2”.
2. Press Button 4 at “Start Day 1” or “Start Day 2”.
3. Scroll through the days of the week or “all” with Button 2 or 3.
4. Press Button 4 to change current “On/Off” setting.
5. Change setting by pressing 2 or 3.
6. Press Button 4 to save changes and press 1 to exit.
7. Press Button 2 or 3 at “Start 1, 8:00” or “Start 2, 8:00”
8. Press Button 4 to change time.
9. Press Button 2 or 3 to set time.
10. Press Button 4 to go to the minutes setting and press 4 again to save.
11. Press Button 1 to exit mode.
12. Repeat process with “Stop Time 1” or “Stop Time 2.”
To Next Page
Loading...
