P-10
Part #1169256 08/2010
6. Press Button 4 to save setting.
7. Press Button 1 to exit and return the display to “Refrigeration.”
If the “Timing Features” in the Confi guration mode are turned ON, you will have additional
access to the following modes:
Enable
Start Time 1 or Start Time 2
Start Day 1 or Start Day 2
Start 1 00.00 or Start 2 00.00
Stop Time 1 or Stop Time 2
Stop Day 1 or Stop Day 2
Stop 1 00.00 or Stop 2 00.00
Sales Block 1 and 2:
Allows you to program the machine to turn off and on at regular intervals.
To program the blocking feature, you must enter the following information:
Start Time
- When the machine turns off
Start Days
Stop Time
- When the machine turns back on
Stop Days
Selections
Discount:
Allows you to program the machine to discount beverages at regular intervals.
To program the “Discount” feature, you must enter the following information:
Start Time
- When the discounting begins
Start Day
Stop Time
- When the discounting ends
Stop Day
Selections
Amount
– Amount subtracted/discounted from original vend price
Override:
Allows various items to be enabled or disabled depending on the status of an attached override
switch.
Each of the following items can be enabled by setting an
ON
or disabled by setting an
OFF
.
“Override Free Vend”
“Override Sales Blocking”
“Override Discount”
“Override Light Timing”
“Override Refrigeration”
To Next Page
Loading...
