To Next PageTo Next Page
Need help?Do you have a question about the VERDEGRO Blade and is the answer not in the manual?
Identifies key components like H Beams and Tubes with specific labels for recognition.
Details official options available for the BLADE TMA, such as Arrow board bracket, Truck bracket, Foil, and Jockey wheels.
Provides visual examples of the Blade TMA in different configurations, including rear view and truck mounting.
Illustrates the assembly of the BLADE cushion in both its extended and retracted positions.
Shows the dimensions of the BLADE bracket construction and overall outer dimensions of the unit.
Illustrates the BLADE TMA configured with an optional frame for VMS or arrow board signs.
Details the dimensions of the BLADE TMA when configured for transport.
Provides the dimensions of the BLADE TMA when it is in its operational state.
Shows visual examples of the BLADE TMA's condition after sustaining a full impact.
Presents a table of various dimensions and technical values for the BLADE TMA.
Details the main control cabinet and other electrical enclosures on the BLADE TMA.
Lists the components and circuit controllers within the main control cabinet.
Describes the location and access to junction boxes situated under the side guards.
Details the cables found within the right and left hand side junction boxes.
Provides detailed electrical data sheets for the BLADE TMA's main control cabinet and junction boxes.
Details the wiring and connections for the left hand side junction box.
Details the wiring and connections for the right hand side junction box.
Illustrates the fuse board and lists the functions of each fuse with their ratings.
Presents the hydraulic system diagram and specifications for the BLADE TMA.
Details warning signs and their locations on the TMA, emphasizing safety precautions.
Specifies the placement of warning signs on or near the guards of the TMA.
Provides essential guidelines and awareness points for operating the BLADE TMA safely and correctly.
Details the basic components of the Verdegro Blade system and its overall functionality.
Outlines specifications regarding materials, assembly, hydraulic systems, and electrical motors.
Defines the performance criteria and testing standards the BLADE TMA must meet.
Lists essential safety instructions for operating and maintaining the BLADE TMA.
Covers practices for safe operation, cleaning, inspection, repairs, and transport.
Explains the basic operation of the BLADE TMA using the wired cabin controller buttons.
Details the indicators and functions of the BLADE TMA's wired cabin controller.
Specifies speed limits for operating the BLADE TMA under various conditions, considering truck suspension.
Explains the optional feature of jockey wheels, their location, and main usage for storage and lifting.
Outlines the steps and requirements for adjusting the supporting truck before TMA installation.
Details the specifications for mounting the BLADE TMA to the truck chassis using the standard bracket.
Provides information to calculate the center of gravity for the BLADE TMA to ensure truck chassis stability.
Details the center of gravity measurements when the BLADE TMA is in its extended state.
Specifies the horizontal dimension from the truck chassis to the center of the hitch pins.
Explains how to use the levelling device to adjust the horizontal position of the cushion.
Describes the procedure and connections for fitting the arrow board frame to the TMA.
Outlines the steps to follow if the TMA truck is hit by another vehicle, ensuring safety.
Provides a checklist for inspecting the BLADE TMA installed on air suspension trucks.
Provides a checklist for inspecting the BLADE TMA installed on spring suspension trucks.
Covers precautions for using the machine in cold weather and safety guidelines for high voltage.
Explains the procedure for checking the hydraulic oil level in the BLADE TMA.
Provides details on hydraulic oil, bearings, and torque specifications for bolts.
Lists control points for chassis, turn table, including corrosion, welds, and bolts.
Covers checks for the crash cushion, blades, and procedures for test running the machine.
Details procedures for welding repairs and other repair notes, including contractor and date.
Outlines the terms, conditions, coverage, and limitations of the BLADE TMA warranty.
Describes the BLADE TMA Certificate of Compliance for MASH testing.
Details the chassis registration sticker, its location, and importance for using the BLADE.
Presents the CE Declaration of Conformity and lists other applied standards for the BLADE TMA.
Provides instructions and the form for submitting a warranty request for the BLADE TMA.
Provides a log format for recording maintenance and repair history for warranty purposes.
General| Brand | VERDEGRO |
|---|---|
| Model | Blade |
| Category | Truck spares |
| Language | English |
