12.3 Control position Crash Cushion
Verify proper operation / adjustment of the cushion on a straight road surface without
any height differences. After unfolding the cushion, the Blade cushion tubes and beams
should be horizontal.
If the machine is not leveled horizontal, directly contact the installer
or manufacturer; use prohibited!
12.4 Use of the machine in cold
• Take into account delays in cold (-5° or colder)
• Ensure that there is no snow, ice or dirt on the safety switches.
• Ensure that there is no snow, ice or dirt on the frame and cushion.
• Protect the machine from the snow and ice when not in use.
12.5 High voltage
Not use or touch this machine within:
• 50 Meters at power Lines on steel towers
• 25 Meters at low voltage lines on wooden poles
• 5 Meters in contact Lines of railway and tramway etc.
To Next Page
Loading...