3 Keep in mind:
The Blade TMA must be properly installed to a support truck. The truck including the TMA
should have a minimum weight of 16.010 lbs. (7.262 kg ) and a maximum weight of
22.120 lbs. (10.033 kg ) for the best performance results.
When operating a BLADE TMA always be aware of the support vehicle roll-ahead during or
after an impact. Always use more! and never less! distance then the maximum roll-ahead
occurred during the full scale crash testing which was 4420mm (100kph with 5000 lbs. test
vehicle).
Check the condition of the Blade daily before starting work based on the instructions. It is
strictly forbidden to use the Blade when it is damaged, not maintained or inspected.
The Blade is equipped with multiple safety applications check these daily, when in doubt
regards the performances contact your local distributor!
The Manufacturer reserves the right to change the machine construction, parts and
maintenance instructions without notice.
This manual is only for the Verdegro Blade TMA. Some drawings, Truck brand / type or
colors in this manual can be slightly different from the delivered model which should be
recognized as a typical Verdegro Blade TMA.
Contact Verdegro for more specifications if needed.
Attention! Before maintenance or checks, operate the TMA to a horizontal
down position and disconnected the power during this period of time!
To Next Page
Loading...