VERDEGRO Blade - Technical Data; Dimensions and Values Table

Page 25 of 68
Operation and maintenance manual Verdegro Blade
5 Technical data
5.1 Table with dimensions and values
Description
Dimension
Cushion Hood to Ground (At marking point horizontal positioned)
12”± 1” 28 – 33cm
Level system fluctuation (For positioning cushion perfectly horizontal )
± 4 degrees
Transport width
7ft.6.7in ( 230cm)
Transport height
12f.11in ( 394 cm)
Total weight
Approx. 1100 kg
Hydraulic pressure
150 bar
Hydraulic gear pump (Thermo switch built-in !)
4.2cc
Contents of hydraulic tank
4 L
Power hydraulic pump
12V – 3kW or 24V - 2,2 kW
Hydraulic rotating cylinders:
2, both with security block
valves and double acting
Amount of electric gearbox motor
4 in total, 2 in each cut and
bend.
Specifications electric gearbox motor
12Vdc or 24Vdc
250W each
Hydraulic pump motor voltage
12Vdc or 24Vdc
LED driving lights
12-24V multi voltage
Battery Bank
Not equipped
Safety fuse hydraulics
200A
Safety fuse at electric controller
12V: 50 A or 24V:25A
Cable from truck to Blade
Min. 2x25mm²
Table 1. Dimensions and values