27
© VeriFone, Inc. All rights reserved.
Installation Guide Carbon Mobile 5
To install a paper
roll
1 Hold both sides of the paper door, which is on the upper corner of the device
and open the paper door by pulling outside (See below
Figure 8).
2 Remove any partial roll of paper in the tray.
Figure: 8 Steps to
Install a
Paper Roll in
Verifone
Carbon
Mobile 5
3 Loosen the glued leading edge of the new paper roll or remove the protective
strip. Unwind the paper roll past any glue residue.
4 Hold the roll so the paper feeds from the top of the roll.
5 Pull the paper past the printer door.
Poor-quality paper can jam the printer and create excessive paper dust. To order
high-quality Verifone paper, refer to
Service and Support.
Store thermal paper in a dry, dark area. Handle thermal paper carefully: impact,
friction, temperature, humidity, and oils affect the color and storage
characteristics of the paper.
Never load a roll of paper with folds, wrinkles, tears, or holes at the edges.
Un papier de mauvaise qualité peut bloquer l'imprimante et créer une poussière
de papier excessive. Commander
papier Verifone de haute qualité, reportez-vous à Service et assistance.
Conservez le papier thermique dans un endroit sec et sombre. Manipulez le papier
thermique avec précaution : les chocs, les frottements, la température, l'humidité
et les huiles affectent la couleur et le stockage.
caractéristiques du papier.
Ne chargez jamais un rouleau de papier présentant des plis, des rides, des
déchirures ou des trous sur les bords.
To Next Page
Loading...
Need help?
General
