17
© VeriFone, Inc. All rights reserved.
Installation Guide Carbon Mobile 5
2. Device Setup
This section outlines the setup procedures for the Verifone Carbon Mobile 5 covering the following
segments:
• Usage Guidelines
• Environmental Factors
• Inside the Shipping Carton
• Examining Verifone Carbon Mobile 5 Device Features
• Installing or Replacing Battery
• Installing or Replacing SAM Cards
• Examining Connection Port
• Using the Battery
• Connecting the Terminal Power Pack
• Loading a Paper Roll in Device with Printer
• Charging the Battery
• Cable Connections
• Using the Smart Card Reader
• Using the Magnetic Card Reader
• Using the CTLS Reader
• Optional Accessories
Usage
Guidelines
Use the following guidelines when using your Verifone Carbon Mobile 5.
Environmental
Factors
• Select a flat support surface, such as a countertop or table, place the device.
Please store your Verifone Carbon Mobile 5 device in a dry area:
• Operation temperature is 0° C to 50° C (32° F to 122 ° F).
• Storage temperature is -20° C to 60 ° C (-4° F to 140 ° F).
• Do not use the device where there is high heat, dust, humidity, moisture, or
caustic chemicals or oils.
To Next Page
Loading...
Need help?
General
