18
Terminal Screen Next Step
11. Use the camera to align the lights on the base
within the red rectangle (while the terminal is still
laying on its side).
12. If the terminal detects any movement, the screen
will display ‘Please Hold Still’ to allow the pairing
process to work.
Note: The terminal needs to remain steady and still
and the pairing lights should be well within the red
rectangle. You can do this by laying the base and
terminal on a flat, clear surface, making sure there
are no bright lights behind the base.
13. The ‘Starting Pairing’ screen will be displayed
for approximately 20 seconds.
14. Press and hold the Pairing Button on the base for
3 seconds.
15. Wait for the base pairing to be completed.
Note: If the Pairing Button is not held long enough,
you’ll get an error message that reads ‘Failed –
Unable to pair with base’.
16. The ‘Complete’ screen will be displayed when
the terminal has been successfully paired to
the base.
To Next Page
Loading...
Need help?
General
