21
4.1 How to set up your manager/cashier passcode
Use this process if you haven’t setup your passcodes during your terminal installation.
1. Select the menu icon located at the top left of the amount-entry screen.
2. Select Settings.
3. Select Security.
4. The ‘Passcode requirements’ screen will be displayed, select OK.
5. The ‘Enter Admin passcode’ screen will be displayed. The owner or authorised
contact will need to contact the Merchant Helpdesk to get the current
Admin passcode.
6. Enter the Admin passcode and press Enter.
7. Enter the new Manager passcode and press Enter.
8. Re-enter the new Manager passcode and press Enter.
9. You will now be prompted to set up a Cashier passcode.
10. Enter the new Cashier passcode and press Enter.
11. Re-enter the new Cashier passcode and press Enter.
4.2 How to change your passcodes
Use this process if you need to change your Manager passcode or change or reset
your Cashier passcode.
Note: The Manager passcode is required to change both the Manager passcode
and the Cashier passcode.
1. Select the menu icon located at the top left of the amount-entry screen.
2. Select Settings.
3. Select Security.
4. Enter the current Manager passcode and press Enter.
5. Select Passcode management.
6. Select Manager or Cashier.
7. Enter the current Manager passcode and press Enter.
8. Enter the new Manager or Cashier passcode and press Enter.
9. Re-enter the new Manager or Cashier passcode and press Enter.
To Next Page
Loading...
Need help?
General
