Verizon jetpack MHS291L - Wi-Fi Security and Management

26 Settings
Broadcast SSID
If you want networking devices to be able to detect your Jetpack
Wi-Fi network performing a site scan, turn on Broadcast SSID.
1. From the Home screen, select Menu and press .
2. Select Wi-Fi Settings > Broadcast SSID and press .
3. You can set Broadcast SSID by selecting On or Off and
pressing .
AP Isolation
AP (Access Point) isolation is a technique for preventing mobile
devices connected to an AP from communicating directly with
each other. If the access point will be used in a public place where
you do not want wireless clients to be able to share files, turn on
AP Isolation.
1. From the Home screen, select Menu and press .
2. Select Wi-Fi Settings > AP Isolation and press .
3. You can set AP Isolation by selecting On or Off and pressing
.
Wi-Fi On/Off
You can turn Wi-Fi on or off.
1. From the Home screen, select Menu and press .
2. Select Wi-Fi Settings > Wi-Fi On/Off and press .
3. You can turn Wi-Fi on or off by selecting On or Off and
pressing .