Veromatic MBE01 - First Installation; Standard Configuration; Alternative Configuration

13
EN
3.7 First installation
The machine is provided with two empty taste cards and a sheet of product stickers. Before
commissioning the correct stickers have to be placed onto the taste cards and installed behind the
glass. The correct sticker placement should correspond to the configuration of the machine. This can
be modified if wished by the service technician.
3.7.1 Standard configuration
The following configuration is pre-programmed as standard.
/3.3
Standard canister configuration (301)
Canister Product
1 Coffee beans
2 Topping
3 Cacao
Standard taste card order
Left taste card Right taste card
Espresso Cappuccino
Coffee Latte Macchiato
Cafe Americano Cafè latte
Wiener Melange Chocolate
Jug Hot water
3.7.2 Alternative configuration
A second configuration is build-in off factory for use with a different canister layout.
Alternative canister configuration (302)
Canister Product
1 Coffee beans
2 Topping
3 Sugar