Veromatic MBE01 - Filling Bean Hopper; Filling Instant Canisters

34
EN
6.7.3 Filling bean hopper
To ensure continued proper operation of this machine, it may only be filled with products that are
prescribed by your dealer.
1 Open the door of the machine.
2 Open the upper lid.
3 Close the bean hopper by pressing the locking slide fully (a), tilt the hopper (b) and remove
(c).
4 Fill the canister to maximum three quarters of the capacity and place back.
5 Place the hopper tilted backwards until the hook on the back slides in the slot, then tilt the
hopper down.
6 To allow beans into the grinder, pull the locking slider towards you.
7 Close the door.
8 Reset the canister level in the menu.
9 Press ‘Go back’ to leave the menu.
Filling the bean hopper inside the machine
1 The bean hopper may also be filled when installed in the machine, however to avoid spilling
use above method.
2 Remove the lid from the canister.
3 Fill the canister to maximum three quarters of the capacity and place back.
4 Close the door.
5 Reset the canister level in the menu.
6 Press ‘Go back’ to leave the menu.
6.7.4 Filling instant canisters
To ensure continued proper operation of this machine, it may only be filled with products that are
prescribed by your dealer.