31
EN
• The brewer is first pre-rinsed.
• Open the door and insert a cleaning pill in the brewer chute when asked. Regular pills of 1.6
gram are advised, max. is 3.5 grams.
•
Close the door, place the canister back underneath the outlet to catch the cleaning liquid
and confirm with 'Start’.
• Now the brewer is thoroughly cleaned. Attention: this proces runs for several minutes. It is
important to let the machine finish the cleaning proces. Finally the brewer will be rinsed 3x
and a espresso product will be given as a last step.
6.7.2 Cleaning instant mixer
1 Turn off the machine.
2 Open the door of the machine.
3 Turn the spouts of the instant product canisters upwards and remove the product canisters
from the machine, starting with the left one (see 1-3).
Close the bean hopper by pressing the locking slide fully (a), tilt the hopper (b) and remove
(c).
4 Clean the mixing system.
• Remove the hose from the outlet.
• Turn the mixer locking ring anti-clockwise to the unlock position.
• Pull the mixer house and the funnel forward so they detach from the mixer plate.
To Next Page
Loading...