16
EN
15 Press the “Go back” key to start operation. Adjust the machine for taste and quantity desired.
16 Choose every product at least twice to check the adjustment. See chapter 4 how to change
flavours.
3.9 Customization of bean grind and product settings
This machine has been pre-adjusted for a general espresso grind and with general settings to provide
the best in-cup quality. However, since the type of bean and instant mixture greatly affect the in-cup
quality, the grind size, dosage and many other settings may need adjustments. See chapter 4 for a
short introduction. Full support can be given by your dealer.
3.10 Instructions for the operator
After the machine has been installed and made ready for operation, the service technician has to
instruct the operator, using this manual, regarding responsible maintenance of the machine according
to the local guidelines. Safety and hygiene are central to this.
To Next Page
Loading...