32
EN
• Remove the mixer paddle from the mixer axis.
• Remove the mixer plate by turning it further clockwise and pulling it from the base.
• Clean all parts in a bucket with hot water, brush them clean and dry.
• Clean the exhaust channel.
• Replace all parts in the reverse order. When placing the mixer house and the funnel on the
mixer plate, remember to turn the mixer plate clockwise until you hear a click.
5 Clean the interior of the machine with a moist cloth.
6 Place the product canisters back into the machine and make sure the spouts point in the
correct direction.
To allow beans into the grinder, pull the locking slider towards you.
7 Reinstall the hoses.
8 Empty and clean the drip tray and the drip tray grate and replace them.
To Next Page
Loading...