44
EN
Motor duty cycle
Ingredient powder motor torque and revolutions limiter for
controlling the dispense speed.
Cacao
Cacao powder dispense time (seconds)
Delay time cacao
mixer
Delay time before the mixer motor starts running.
Mixer duty cycle
Mixing motor torque and revolutions limiter for full
strength or less powerfull mixing.
Running time cacao
mixer
Time that the mixer motor is running.
Break time multicup Pause time between multiple cup vends
Multicup enabled Multicup enabled or disabled per product
Product strength Product strength to be increased /decreased by percentage
Milk strength Product strength to be increased /decreased by percentage
Sugar Strength
Product strength to be increased /decreased by percentage
Use Counter Whether the counter is used.
Milk choice enabled To use Milk as by-product
Sugar choice enabled To use Sugar as by-product
Direct Start
To use Product as a direct start, once the product key is
pressed it will not ask for confirmation and dispensing
starts immediately.
Max. multicup count
Max. number of cups allowed when jug is selected (default
= 3 or 7 depending on machine type).
1.3
Product Key Layout User can change the layout of the Product.
All possible keys will lit. Select key then machine will
prompt for available list of choices. Scroll through the list
and choose the product. Product will get assigned to key.
1.4
Load Defaults
All possible keys will lit. Select a key which you want to
overwrite with default values and Press Enter.
2
System Settings
2.1
Pay Systems Settings
Point Position Decimal point position for display.
Discount Percentage Set here discount percentage to charge in discount mode.
Show Credit
To show or hide the credit on screen. If Disabled credit will
be shown as '****'.
Currency code
Scroll through the following list:
EUR= Euro
USD= US Dollar
GBP= Pound
XEU = ECU code (now absolute)
XTS = Testing code
To Next Page
Loading...