47
EN
3 Monitor Sensors
This is diagnostic screen use
through to monitor sensors.
Espresso: Min.
operating temp
Boiler Temperature and state of the heater (on/off)
Door: Open/Close
Driptray: Drip tray: Empty/ Full
Cup Left: Cup Sensor L: Cup / No Cup
Cup Right: Cup Sensor R: Cup / No Cup
Esp. brewer In Rest/ Moving / In outlet / Removed.
Waste Bin: Present / Not present.
Fan: Fan: On/Off
Esp.W.Max: Espresso water level max: Achieved/ Not Achieved
Esp.W.Min: Espresso water level min: Achieved/ Not Achieved
4
Power Management
Machine On To set machine in normal or operational mode.
Machine Off To set machine in Power save / stand-by mode.
VIPS mode
If VIPS is selected then, it will observe the user pattern for
two weeks. Then according to usage, the machine
automatically switches between Power save/Standby and
On.
Reset VIPS mode
This will reset VIPS pattern stored. Starts collecting data
once again.
5
Pay System Select pay system mode for machine. Scroll through the
list and press Enter to set payment mode.
If machine is in paid mode. Pay system will be enabled.
Machine will ask for credit to dispense a drink.
User will be charged with a discounted rate. Discount
percentage can be set in
System Settings->Pay System -> Discount percentage.
User can take drink for free.
Paid
Discount
Free Vend
6
Counters
Espresso
Scroll the list by UP/DOWN Keys. Product name and
Count will be displayed on the screen.
It is also possible to save counters to USB drive.
Insert USB drive into the USB port on machine and press
“Start” key. Follow the instructions on display to copy
counters.
(Note: actual
list may be different depending on
configuration file and model selected.)
Coffee
Cafe Americano
Caffe latte
Cappuccino
Cappuccino special
To Next Page
Loading...