49
EN
Merge settings from
USB
To Merge the settings to the actual settings
Save Settings to USB. To save settings from the current machine to USB
Test Programs To view or to start the Factory test programs
Empty Boiler To start the process of emptying the boiler.
Load Software
To load new “PP58.bin” file from the USB. Select folder and
load new file
Load Bootloader To load new bootloader
11.
Password
Enter password Enter Password to change the access level.
Change password
User can change the password he is logged in or the level
below. To change the password user needs to select the
level and enter new password. Available keys for password
are Key 0, 2, 4 and Start key.
After successful confirmation the password will change.
To Next Page
Loading...