Versitron SG71660M - Factory Default

To Next Page

To Previous Page

4-4-2. Factory Default

Function name:

Factory Default

Function description:

Factory Default provides the function to retrieve default settings and replace current configuration.

Except the IP address setting, all settings will be restored to the factory default values when

“Factory Default” function is performed. If you want to restore all configurations including the IP

address setting to the factory default, please press the “RESET” button on the front panel.

Note for “RESET” button:

You must press the “RESET” button over 3 seconds to restore the factory default settings.

Fig. 4-35