84
VLAN Id:
Show VLAN Id for each multicast group.
Querier:
Show the group membership queries status.
Queries transmitted:
To count the group membership queries transmitted.
Queries received:
To count the group membership queries received.
V1 Reports:
When a host receives a group membership query, it identifies the groups associated with the
query and determines to which groups it belongs. The host then sets a timer, with a value less
than the Max Response Time field in the query, for each group to which it belongs. It Calculate
the number of times of IGMPV1 report.
V2 Reports:
When a host receives a group membership query, it identifies the groups associated with the
query and determines to which groups it belongs. The host then sets a timer, with a value less
than the Max Response Time field in the query, for each group to which it belongs. It Calculate
the number of times of IGMPV2 report.
V3 Reports:
When a host receives a group membership query, it identifies the groups associated with the
query and determines to which groups it belongs. The host then sets a timer, with a value less
than the Max Response Time field in the query, for each group to which it belongs. It
Calculates the number of times of IGMPV3 report.
V2 Leaves:
When a host leaves a group, it sends a leave group membership message to multicast routers
on the network, it show the leaves number.
Fig. 4-32 IGMP Status
4-3-6. Ping Status
Function name:
Ping Status
Function description:
To Next Page
Loading...