Vertex Standard FT-950 - Page 128

FT-950
Operating Manual
Vertex Standard Co., Ltd.
128
You may adjust the equalizer gain and Q-factor at this selected audio frequency via
menu items “095 TAUD EQ2 LVL” and “096 EQ2 BW.”
095 TAUD EQ2 LVL
Function: Adjusts the equalizer gain of the middle range of the parametric microphone
equalizer.
Available Values: –10 ~ +10
Default Setting: +5
096 TAUD EQ2 BW
Function: Adjusts the Q-factor of the middle range of the parametric microphone
equalizer.
Available Values: 1 ~ 10
Default Setting: 10
097 TAUD EQ3 FRQ
Function: Selects the center frequency of the high range for the parametric microphone
equalizer.
Available Values: OFF/1500 ~ 2000 Hz (100 Hz/step)/3200 Hz
Default Setting: OFF
OFF: The equalizer gain and Q-factor are set to factory defaults (flat).
15 ~ 20/32: Center frequencies of 1500 Hz ~ 3200 Hz.
You may adjust the equalizer gain and Q-factor in this selected audio frequency via
menu items “098 TAUD EQ3 LVL” and “100 TAUD EQ3 BW.”
098 TAUD EQ3 LVL
Function: Adjusts the equalizer gain of the high range of the parametric microphone
equalizer.
Available Values: –10 ~ +10
Default Setting: +5
099 TAUD EQ3 BW
Function: Adjusts the Q-factor of the high range of the parametric microphone
equalizer.
Available Values: 1 ~ 10
Default Setting: 10