FT-950
Operating Manual
Vertex Standard Co., Ltd.
129
100 TAUD PE1 FRQ
Function: Selects the center frequency of the lower range for the parametric
microphone equalizer when the speech processor is activated.
Available Values: OFF/100 ~ 700 Hz (100 Hz/step)
Default Setting: OFF
OFF: The equalizer gain and Q-factor are set to factory defaults (flat).
100 ~ 700: Center frequencies of 100 Hz ~ 700 Hz.
You may adjust the equalizer gain and Q-factor at this selected audio frequency via
menu items “102 TAUD PE1 LVL” and “102 TAUD PE1 BW.”
101 TAUD PE1 LVL
Function: Adjusts the equalizer gain of the low range of the parametric microphone
equalizer when the speech processor is activated.
Available Values: –10 ~ +10
Default Setting: +5
102 TAUD PE1 BW
Function: Adjusts the Q-factor of the low range of the parametric microphone equalizer
when the speech processor is activated.
Available Values: 1 ~ 10
Default Setting: 10
103 TAUD PE2 FRQ
Function: Selects the center frequency of the middle range for the parametric
microphone equalizer when the speech processor is activated.
Available Values: OFF/700 ~ 1500 Hz (100 Hz/step)
Default Setting: OFF
OFF: The equalizer gain and Q-factor are set to factory defaults (flat).
700 ~ 1500: Center frequencies of 700 Hz ~ 1500 Hz.
You may adjust the equalizer gain and Q-factor at this selected audio frequency via
menu items “104 TAUD PE2 LVL” and “105 TAUD PE2 BW.”
104 TAUD PE2 LVL
Function: Adjusts the equalizer gain of the middle range of the parametric microphone
equalizer when the speech processor is activated.
To Next Page
Loading...
