Vertex Standard FT-950 - TX GNRL Group; Speech Processor Level and VOX Settings

FT-950
Operating Manual
Vertex Standard Co., Ltd.
130
Available Values: –10 ~ +10
Default Setting: +5
105 TAUD PE2 BW
Function: Adjusts the Q-factor of the middle range of the parametric microphone
equalizer when the speech processor is activated.
Available Values: 1 ~ 10
Default Setting: 10
106 TAUD PE3 FRQ
Function: Selects the center frequency of the high range for the parametric microphone
equalizer when the speech processor is activated.
Available Values: OFF/1500 ~ 2000 Hz (100 Hz/step)/3200 Hz
Default Setting: OFF
OFF: The equalizer gain and Q-factor are set to factory defaults (flat).
15 ~ 20/32: Center frequencies of 1500 Hz ~ 3200 Hz.
You may adjust the equalizer gain and Q-factor in this selected audio frequency via
menu items “107 TAUD PE3 LVL” and “108 TAUD PE3 BW.”
107 TAUD PE3 LVL
Function: Adjusts the equalizer gain of the high range of the parametric microphone
equalizer when the speech processor is activated.
Available Values: –10 ~ +10
Default Setting: +5
108 TAUD PE3 BW
Function: Adjusts the Q-factor of the high range of the parametric microphone
equalizer when the speech processor is activated.
Available Values: 1 ~ 10
Default Setting: 10
TX GNRL Group
109 TGEN PROCLVL
Function: Sets a compression level of the Speech Processor.
Available Values: 0 ~ 100
Default Setting: 50