Vertiv Liebert EDGE Series User Manual

Vertiv | Liebert® EDGE | Installer/User Guide
19
Input Status Options
L-N voltage (V)
Line-neutral voltage of input power.
L-N current (A)
Line-neutral current of input power.
Frequency (Hz)
Frequency of input of input power.
Energy (kWh)
Input power.
Input blackout count
The number times that the input voltage was lost or dropped below 60 VAC (black out) Resets to 0
when UPS is powered down.
Input brownout count
The number of times that the input voltage was too low to support the load and the UPS was forced to
switch to battery power (brown out) Resets to 0 when the UPS is powered down.
Battery Status Options
Battery status
Current battery state: charging, discharging, or fully-charged
Battery voltage (V)
Voltage of battery power
Battery current (A)
Current of battery power
Backup time (Min)
Amount of back-up time remaining for battery
Remaining capacity (%)
Percent of capacity remaining for battery
Discharge count
Number of discharges for the battery module
Total discharge time (Min)
Number of minutes until battery is fully discharged

Vertiv Liebert EDGE Series Specifications

General

Brand	Vertiv
Model	Liebert EDGE Series
Category	UPS
Language	English