Vertiv LIEBERT GXT5 Series User Manual

Vertiv | Liebert® GXT5™ | Installer/User Guide 23
NOTE: When removing an EBC, turn o the circuit breaker on the rear of the cabinet before disconnecting the cable.
NOTE: If shipping or storing the UPS for an extended time, disconnect the EBC(s) minimize stand-by current drain
on the batteries and help maintain design life.
NOTE: Storage of batteries beyond 6 months after delivery will require a recharge to avoid damage to the batteries
and voidance of warranty.
Figure 2-2 EBCs connected to the UPS
ITEM DESCRIPTION
1 EBC-detection dry-contact port (See Table 2-4 on page 31, for details.)
2 EBC connector
3 EBC-detection port
4 External battery cabinet
5 External battery cabinet

Vertiv LIEBERT GXT5 Series Specifications

General

Model	LIEBERT GXT5 Series
Product Type	UPS
Topology	Double Conversion Online
Display	LCD
Form Factor	Tower, Rackmount
Output Voltage	200/208/220/230/240 VAC
Output Frequency	50/60Hz ±0.1Hz (battery mode)
Typical Backup Time	Varies by model and load
Communication Ports	USB, RS-232
Operating Temperature	0°C to 40°C (32°F to 104°F)
Relative Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Certifications	UL, cUL, CE, RoHS
Battery Type	Valve Regulated Lead Acid (VRLA)