Vertiv LIEBERT GXT5 Series User Manual

Operation and Display Panel44
Table 4-1 Display-panel Button Functions and Descriptions
BUTTON FUNCTION DESCRIPTION
Enter Conrm or enter selection.
Up Move to previous page, increase value, move left.
Down Move to next page, decrease value, move right.
Escape Go back.
Power Power-on the UPS, power-o the UPS, transfer to Bypass Mode.
NOTE: While the UPS is operating, the LCD will dim and display a screen saver if there is no active alarm or user
interaction for two minutes, see Figure 4-2. If an alarm or fault occurs or if any button is pressed, the UPS-ow
screen displays.
Figure 4-2 LCD Screen Saver
4.1. LED Indicators
The LEDs on the front-panel display indicate operation and alarm statuses of the UPS.
Table 4-2 LED Functions
INDICATOR LED COLOR LED STATE INDICATES
Run indicator Green
On UPS has output
Blinking Inverter is starting
O
UPS has no
output
Alarm indicator
Yellow On Alarm occurs
Red On Fault occurs
None O No alarm, no fault

Vertiv LIEBERT GXT5 Series Specifications

General

Model	LIEBERT GXT5 Series
Product Type	UPS
Topology	Double Conversion Online
Display	LCD
Form Factor	Tower, Rackmount
Output Voltage	200/208/220/230/240 VAC
Output Frequency	50/60Hz ±0.1Hz (battery mode)
Typical Backup Time	Varies by model and load
Communication Ports	USB, RS-232
Operating Temperature	0°C to 40°C (32°F to 104°F)
Relative Humidity	0% to 95% (non-condensing)
Dimensions	Varies by model
Weight	Varies by model
Certifications	UL, cUL, CE, RoHS
Battery Type	Valve Regulated Lead Acid (VRLA)