Vertiv Netsure User Manual

NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
[144]
ADVANCED SETTINGS MENU
The Advanced Settings Menu allows you to change (if you have the proper privilege level programmed in your User settings) the settings
of the various advanced programmable parameters. Settings are grouped per function. Select a tab in the Advanced Settings Menu to
change that functions programmable parameters.
Ethernet Tab
You can configure the controller's network parameters. IPv4: IP Address, Subnet Mask, and Default Gateway. IPv6: IPv6 Address, IPv6
Prefix, and IPv6 Gateway. After modifying the network parameters, click "Save" to validate the change made to the parameters.
NOTE: After changing the IP Address, you will need to login again with the new IP address.
Figure 76. Ethernet Tab

Vertiv Netsure Specifications

General

Brand	Vertiv
Series	Netsure
Humidity Range	5% to 95% non-condensing
Cooling Method	Forced air
Communication Interface	Ethernet
Protection Features	Overvoltage, overcurrent, short circuit, overtemperature