Vertiv Netsure User Manual

NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
[147]
SNMP Tab
Configures SNMP V2 and V3 parameters.
Accepted Trap Level Parameter Description
 Accepted Trap Level: Sets SNMP V2 and V3 trap level.
Adding an Entry
1. Enter the parameters in the parameter fields.
2. Click the "Add" button to add the entry.
NOTE: To reset the form (i.e. to start over) and erase all information entered, click on the “Reset” button.
Modifying an Existing Entry
1. Select the Entry to be modified from those listed at the top of the screen.
2. Modify the parameters.
3. Click the "Modify" button to modify the parameters for this Entry.
NOTE: To reset the form (i.e. to start over) and erase all information entered, click on the “Reset” button.
Deleting an Entry
1. Select the Entry to be deleted from those listed at the top of the screen.
2. Click the "Delete" button to delete this Entry.

Vertiv Netsure Specifications

General

Brand	Vertiv
Series	Netsure
Humidity Range	5% to 95% non-condensing
Cooling Method	Forced air
Communication Interface	Ethernet
Protection Features	Overvoltage, overcurrent, short circuit, overtemperature