Vertiv Netsure - Local Display Menus; FACTORY DEFAULT SETPOINTS

NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
[70]
Local Display Menus
Overview
This section provides descriptions of the Local Display Menus.
Refer also to “Passwords and Privilege Levels” on page 13 and
“Description of Local Display Menus Programmable Parameters”
on page 86. For Web Interface, refer to “Web Interface Screens”
on page 93.
Menus
Figure 11 to Figure 19 provide flow diagrams of the menus
accessed via the NCU Controller local display and keypad.
NOTE: These instructions describe the complete functionality
of the NCU Controller. Some functionality is dependent on
hardware connected to the NCU Controller. Some menu items
shown may not be present in the NCU Controller used in your
system.
FACTORY DEFAULT SETPOINTS
Refer to the Configuration Drawing (C-drawing) furnished with
your system for a list of factory default values.
ADJUSTMENT RANGE RESTRICTIONS
See Figure 10.