NetSure
™
Control Unit (NCU)
User Manual, UM1M830BNA
Spec. No: 1M830BNA, 1M830DNA Code: UM1M830BNA
Model No: M830B, M830D Revision M, May 12, 2017
The equalize charging current exceeds the
alarm setting.
Temperature Compensation Active
Battery charge temperature compensation
is active.
Battery Current Limit Active
Battery is in current limit.
A battery test is active (the discharge test
will stop automatically). There is a mains
failure (check that it is not caused by open
AC input circuit breaker). The system load is
higher than rectifier capacity, causing the
batteries to discharge (install additional
rectifiers).
Compensation temperature sensor sensing
temperature higher than high temperature
threshold 2.
Check why temperature is high or low.
Compensation temperature sensor sensing
temperature higher than high temperature
threshold 1.
Compensation temperature sensor sensing
temperature lower than low temperature
threshold.
Compensation Sensor Fault
Temperature Compensation temperature
sensor failure.
Replace temperature sensor.
Temperature sensor #1 sensing
temperature higher than high temperature
threshold 2.
Check why temperature is high or low.
Temperature sensor #1 sensing
temperature higher than high temperature
threshold 1.
Temperature sensor #1 sensing
temperature lower than low temperature
threshold.
Temperature sensor #2 sensing
temperature higher than high temperature
threshold 2.
Check why temperature is high or low.
Temperature sensor #2 sensing
temperature higher than high temperature
threshold 1.
Temperature sensor #2 sensing
temperature lower than low temperature
threshold.