Vesco AHD DVR - 5 Network Access Settings and Cloud Technology Introduced; LAN Access Settings; Cloud Technology Functions and Using Introduction

To Next Page

To Previous Page

AHD DVR User Manual

5. Network Access Settings and Cloud Technology Introduced

5.1 LAN Access Settings

1、Network connection

(1) Before the WEB operation, make sure your DVR is properly connected to the network.

(2) Enter DVR “Main Menu” “Network” to set correct IP address, subnet mask, DNS and gateway or set to obtain IP

address automatically by DHCP. Port retains the default settings. (The IP segment of device should be the same with PC, if

disconnected, please check device IP was connected successfully.)

2、Login

Step 1: After connecting successfully, then you can login to view.

Open a web browser; enter the IP address of the login device in the address bar. As the device with IP address

192.168.1.10, HTTP port 80 for example, then enter: http://192.168.1.10 in the address bar and connections. If HTTP port

is not 80, such as 81, then need to add port when viewing, as: http://192.168.1.10:81

Note: If the PC connects the device at first time, when open system, the security warning will pop up whether to accept the

WEB control web. cab, please choose to accept the user, the system will automatically identify the installation. (If the

system is prohibited to download, please confirm whether you have closed other prohibited controls to download software

and reduce the IE security level, permit unsigned plug-in to operate. Connection as shown below will pop up after the

success of the interface.

Step 2: Enter the user name and password, the company factory default administrator user name admin, password is

blank.

5.2 Cloud Technology Functions and Using Introduction

Cloud technology is the latest network remote access technology; with cloud technology, without any complex network

settings to achieve remote access easily.

Note: Some of the devices don’t have this function, pls prevail in kind.

Main features of cloud technology

One step to realize DVR Internet, operating easily and conveniently. No need to have professional network knowledge,

DDNS and port mapping; instantly connect just use and review.

WAN remote access & Cloud technology use

1.Open a web browser, enter cloud access address(The method of looking at cloud server address: Boot and select

“desktop shortcut menu” “System information ” “Version information ”“Cloud server”）.

There are two ways to remote control the device with cloud technology: