Assembly - attachment
35
Machine in the
transport position
Check the surrounding area before starting to use machine
Before driving and using the machine the surrounding area should be
checked.
This prevents persons and animals in the vicinity from being harmed.
If the surrounding area is not checked it can lead to serious injuries on
persons or animals.
The machine is converted into transport position in the following way:
> Activate the tractor's lift arms and raise the machine completely
free of the ground.
• Check that the machine's first guard can move past the tractor's
rear right-hand wheel.
> Pull in the cord and release the lock catch.
> Hold in the string and activate the tractor's hydraulics and the
machine will be raised up to the transport position.
> Release the string once the cutting unit is raised approximately
halfway up.
> Check that the lock is locked when the cutting unit is in the
transport position.
> Activate and lower the tractor's lift arms down to the fixed working
height.
To Next Page
Loading...
