EasyManua.ls Logo

Vicon Extra 228 - Pre-Operation Checks

Vicon Extra 228
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
Operation
Before operating
Make sure that the initial start of the machine is unhindered
Make sure the area around the machine is checked before start up.
Paying attention to the area around the machine will prevent injury to
persons or animals.
Insufficient attention to the area around the machine can result in
serious injuries.
Ensure in particular there are no children or unauthorised
persons
Make sure the area around the machine is checked before start up.
Paying attention to the area around the machine will prevent injury to
children and unauthorised persons.
Insufficient attention to the surrounding area can result in serious
injuries.
The following instructions should be complied with:
Check all points mentioned in the “maintenance” section.
»Specific safety information« page 51
»Lubrication safety and use of oil« page 51
Check knives are not worn down. The knives can be turned so they
rotate in the opposite direction.
»Knives« page 60
The machine is operated in the following way:
> Make sure that there are no persons in the surrounding area.
> Check that the machine is in the working position.
> Fasten all the guards on the machine.
> Carefully connect the tractor's PTO shaft
> Carefully increase the speed of the PTO shaft to 540 RPM.
»Machine specification« page 21
> Starting the tractor’s forward drive.
NB
If none of the machine's functions are working:
> Stop the tractor’s forward drive.
> Stop the tractor.
> Disconnect the PTO shaft immediately.
> Disconnect the tractor's hydraulic system immediately.
NB
If the machine is too noisy or vibrates too much, stop the machine
immediately.
»Troubleshooting« Page 88.

Other manuals for Vicon Extra 228

Related product manuals