Assembly - attachment
25
Attachment of the
tractor
Attaching the machine
When attaching the machine there is an increased risk of personal
injury.
Attention to the safety instructions assures your and others personal
safety.
Failure to follow the safety instructions could result in serious injuries.
Lock the tractor's lift arms
Lock the tractor's lift arms at the correct height.
If the lift arms are at the correct height,it will prevent damage to the
PTO shaft and injury to persons in the vicinity.
Lowering or raising the lift arms can lead to injury and can damage the
PTO shaft.
Therefore, when attaching the machine, you must ensure that the
machine cannot become detached from the tractor.
> Adjust the right and left lift arm so they are at the same height.
> Swing the lower link crossbar to the side or remove the lower link
crossbar.
> Raise or lower the tractor's lift arms until the machine's linkage pin
can be mounted on the tractor's lift arms.
The machine is fitted with linkage pins which can be changed.
The linkage pins are changed in the following way:
> Use a suitable tool to loosen the bolts on the linkage pins.
> Remove the linkage pins and change them.
> Fit the linkage pins.
To Next Page
Loading...
