EasyManua.ls Logo

Vicon Extra 228 - Operator Qualifications; Machine Connection Safety

Vicon Extra 228
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Safety
9
Who can operate
the machine?
Operators of this machine should only be trained farmers and others
who are qualified to work in agriculture and who are familiar with
assembling equipment.
Untrained or unauthorised members of staff may not use this machine.
Connecting
Correct attachment of the machine
The machine must be correctly connected, following the instructions.
The machine can be detached from the tractor if the connection is not
carried out properly.
Incorrect attachment can lead to accidents.
When attaching the machine to the tractor you must therefore:
Make sure that the tractor cannot roll.
Make sure that the tractor and the machine belong to the same
category.
Never stand between the tractor and the machine during
attachment.
Use the hydraulic three point suspension slowly and carefully.
Following the above instructions will protect you and others from
injury.
If you do not pay attention to the above instruction points serious injury
could occur.
PTO shaft check
Refer to the manufacturer's safety instructions delivered with the PTO
shaft.
Make electrical connection after attachment
When fitting the lighting device, the power supply to the tractor must
be turned off.
This will prevent short circuits and damage to the electric circuit.
If there is a short circuit, there may be a risk of burns and other serious
injuries.
95-039
fr
95-015 fr

Other manuals for Vicon Extra 228

Related product manuals