Parking and Storage
47
The machine is disconnected in the following way:
> Activate the tractor hydraulics and raise the machine fully.
> Lower the machine's cutting unit back down to the working
position.
NB
It is recommended that the hydraulic outlet on the tractor is in the
floating position.
> Turn the catch to the position shown.
NB
The catch must be able to be turned to the position shown when the
machine is attached and is lifted free of the ground with the tractor's
three-point hitch.
> Turn the support leg around and lower it down as shown.
> Remove the chain.
To Next Page
Loading...
