76
Maintenance
Bevel gear
Changing oil
Every season
Oil amount when changing oil:
»Maintenance intervals« page 53
T
IP
!
It is recommended that when changing the oil, the machine is fitted to
the tractor and the hydraulic system is connected to the machine.
»Attachment of the tractor« page 25
The oil is changed as follows:
> Lift the machine up to the transport position.
»Machine in the transport position« page 35
> Use a suitable tool to remove the oilplug 2.
> Let the oil run into a suitable receptacle.
> Allow the last of the oil to drip out of the transmission for approx.
10 - 15 minutes.
> Lower the machine back down to the working position.
> Remove oilplug 1.
> Fill up with new oil until it oil level reaches the hole for oilplug 2.
> Fit oilplug 1 and 2.
Litre
(approx.)
Pints (US)
(approx.)
Pints (Imp.)
(approx.)
0.6 1.3 1.0
To Next Page
Loading...
