Troubleshooting
89
PTO shaft
•
1
Problems with stripes are more likely to occur when mowing
short, strong, spring crops in less than ideal weather conditions.
Always check that the knives on the cutting discs are sharp. The
angle of the machine can be changed a little to experiment
(forwards or backwards). Ensure that the PTO shaft does not drop
downwards when the length of the top link is changed.
•
2
Extra equipment - Page 85
Fault Possible cause Remedy Page
The PTO shaft is
knocking
The top link between the tractor and
the machine is too short (low stubble
height)
Increase the length of the top link 39
To Next Page
Loading...
