Vicon Extra 532 - Disposal; Metal Parts; Rubber Parts; Plastic

Disposal
131
Disposal
When the machine reaches the end of its service life, it must be
disposed of in the correct way. Observe the following:
Metal parts
Send usable parts to an authorised recycling plant. Larger scrap parts
must be taken to an authorised breaker's yard where they can be
processed in accordance with current regulations.
Rubber parts
Send usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.
Plastic
Send usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.
Hydraulic oil
All oil must be drained from the machine
The used oil must be sent to a breaker's yard where it can be
processed in accordance with current regulations.
Electronic parts
Send usable parts to an authorised recycling plant where they can be
processed in accordance with current regulations.