Maintenance
59
Maintenance
For your own
safety
Comply with the service and maintenance intervals given in the
instructions
Comply with the intervals for service and maintenance as given in the
instructions.
By complying with the maintenance intervals you ensure that the
machine will operate without malfunctions and provide maximum
protection for the environment.
An incorrectly maintained machine is a danger to the environment.
Specific safety
information
• Repair and maintenance work should only be carried out by
persons with the necessary professional knowledge and the
correct tools.
• The PTO on the tractor should be disconnected, and the motor
should be stopped.
• Make sure that the handbrake is applied and the ignition key has
been removed from the tractor.
• Make sure the machine is secured with wedges under the wheels
before starting work.
• No one should be in between the tractor and the machine if the
machine has not been secured.
• Always use original spare parts on the machine.
• Never use a pressurised grease gun spray to lubricate the machine
bearings.
• When carrying out any type of service and maintenance work
where the machine's cutting unit is raised up, the mechanical
safety valve must always be closed.
Lubrication safety
and use of oil
Oils and lubricants contain additives that under certain circumstances
can have serious consequences for your health. Therefore, when
using oil and lubricants be aware of the following:
• Avoid direct contact with these agents. They can damage the skin.
• Protect your skin with barrier cream or protective gloves.
• Never use oil or lubricants to clean your hands.
• Clothes contaminated with oil should be changed immediately.
• Oily cloths should not be kept in your pockets.
• Used oil must be collected and sent to a disposal company, where
the oil will be processed in accordance with the regulations in
force.
• Seek medical help if skin is injured by oil or lubricants.
To Next Page
Loading...
