Operation
47
Operation
Safety
Read the safety instructions before using the machine
Before using the machine, the operator should read the safety instruc-
tions carefully.
→ »Safety« page 5
Attention to the task will ensure your safety and that of others.
Failure to follow the instructions may result in serious injuries.
Work on the machine should only be carried out by persons who
have received correct training
The machine should only be operated if the operator has been given
thorough instructions.
Thorough machine instruction allows safe usage.
Insufficient training may lead to incorrect usage of the machine and
accidents.
Do not remove the protective guards
Check that all protective guards are in place before use.
This ensures that the machine will offer maximum protection to the
operator.
If the safety guards are removed or not used, it may result in serious
injuries and accidents.
Before operating
Make sure that the initial start of the machine is unhindered
Make sure the area around the machine is checked before start up.
Paying attention to the area around the machine will prevent injury to
persons or animals.
Insufficient attention to the area around the machine can result in
serious injuries.
Keep away from the machine
No unauthorised persons should be close to the machine during
operation.
This will ensure that no dangerous situations can arise.
Persons close to the machine during operation are at risk of being
severely injured.
Make a specific check for children
Make sure the area around the machine is checked before start up.
Paying attention to the area around the machine will prevent injury to
children.
Insufficient attention to the surrounding area can result in serious
injuries.
The following instructions should be complied with:
• Check all points mentioned in the “maintenance” section.
→ »Specific safety information« page 59
→ »Lubrication safety and use of oil« page 59
• Check blades are not worn down. The knives can be turned so as
to gain the opposite rotational direction.
→ »Knives« page 76
To Next Page
Loading...
